PTFE Sleeve
PolyTetraFluoroEthylene (PTFE) Sleevings and Tubings are intended for applications involving High Frequencies, High Temperature or both. PTFE have excellent electrical properties, which does not change over a wide range of frequencies, temperatures and humidity. These sleevings and tubings are manufactured by Tape Wrapping Sintering (TWS) process that enables these high flexibility and excellent mechanical stability.
Few advantages of PTFE Insulation are as follows:
Wall thickness |
Volts (AC RMS) |
0.25MM |
11,500 |
0.30MM |
14,600 |
0.40MM |
16,300 |
0.50MM |
17,000 |
Lengthwise shrinkage after 2 Hours at 300°C : 1% Max.
Datasheets for standard sizes :
S. |
I.D. (MM) |
Wall Thickness (MM) |
||
No. |
Nominal |
Tolerance |
Nominal |
Tolerance |
1. |
0.50 |
+ 0.10 |
0.25 |
+ 0.05 |
2. |
1.00 |
+ 0.10 |
0.25 |
+ 0.05 |
3. |
1.50 |
+ 0.15 |
0.25 |
+ 0.08 |
4. |
2.00 |
+ 0.15 |
0.30 |
+ 0.08 |
5. |
2.50 |
+ 0.15 |
0.30 |
+ 0.08 |
6. |
3.00 |
+ 0.15 |
0.35 |
+ 0.08 |
7. |
4.00 |
+ 0.20 |
0.40 |
+ 0.08 |
8. |
5.00 |
+ 0.20 |
0.50 |
+ 0.10 |
9. |
6.00 |
+ 0.30 |
0.50 |
+ 0.10 |
10. |
7.00 |
+ 0.30 |
0.50 |
+ 0.10 |
11. |
8.00 |
+ 0.30 |
0.50 |
+ 0.10 |
12. |
9.00 |
+ 0.30 |
0.50 |
+ 0.10 |
We offer customized sizes also on special requirement.
Applications of PTFE Sleevings and Tubings: